Applications

Features

Options

Flooded Lead Calcium Batteries.

Designed for Standby Power Applications.

• Emergency lighting
• U.P.S. (Uninterruptible Power Supplies)
• Switchgear
• Life safety support
• Telecommunications

• Lead calcium grid alloy
• P.V.C separator with glass mat retainer
• Ten year design life
• U.L. recognized flame arrestor vents
• U.L. recognized flame arrestor vents (Not on the PL-5C)
• Recommended float voltage 2.25 V.P.C. without equalize
• 1.225 S.G.

• Available in a dry charged condition.
• Other specific gravities available upon request. (Not on the PL-5 )

The POWER MOBILITY series is a state of the art line of advanced GEL sealed batteries designed specifically for wheel chair applications. Power Battery uses an advanced GEL (patent pending) design which combines the best features of AGM and GEL into one battery line.

It is highly resistant to vibration, extreme temperatures and rough handling. This combination makes the POWER MOBILITY series the perfect choice for the high reliability applications that wheel chairs require.

Cast-on strap design for better consistancy and better life

• Shock absorbent polypropylene plastic. Resistant to extreme temperatures and vibration.
• Thermally welded cover to case. Eliminates the risk of both acid and electrical leaks.
• Maintenance free construction. Needs no water additions; will not allow electrolyte spills.
• Advanced GEL design. Provides deep cycle capability throughout the life of the battery.
• Oversized internal components. Insures minimal voltage drop and more power availability.
• Oversized internal components. Insures minimal voltage drop and more power availability.
• Industrial grade battery plates. Out lasts wet lead acid and marine batteries.
• Each battery is equipped with lifting handles.
• Each cell has a pressure release venting system to control gassing when operated in normal conditions.
• Can be used in any position, except upside down.
• 100% recyclable materials.
• Non-spillable Valve Regulated Lead Acid (V.R.L.A.).
• Advanced absorbed glass mat technology (AGM).
• Sealed construction for operation in any position except upside down.
• Wide operating temperature range.
• High discharge rates and low self discharge rates.
• Available in V0 Flame Retardant Material.
• High impact resistant plastic case.
• Each cell has a low pressure safety release valve.
• 98% recyclable.
• Not restricted for Surface, Maritime and Air Transport.

• Battery cables & harnesses
• Battery boxes.
• Other models available

The Power "TL and Front Access CSL" batteries are the ideal choice for Telecommunication applications which require a reliable, compact and affordable solution.

Our state of the art V.R.L.A. design utilizes an absorbed glass mat (A.G.M) separator technology to immobilize the battery electrolyte.

There is never any need to add water to the cells and in fact all vents are factory sealed. Since these batteries are low-gassing they require no special ventilation. Additionally, a compact design makes them perfect for low maintenance and space restricted applications.

Cast-on strap design for better consistancy and better life

• Ten year design life.
• A recognized component of U.L.
• Non-spillable valve regulated lead acid (VRLA) design.
• Advanced absorbed glass mat technology (AGM) with gas recombination greater than 99%.
• Operates at a low internal pressure.
• Never needs watering, minimal maintenance.
• 99.985% pure lead calcium grids.
• Shock absorbent thick wall polypropylene cases.
• Cases are flame retardant, meet U.L. 94. V0 requirements, and have an oxygen index greater than 28%.
• Cold forged non-porous terminal bushings, eliminate post leakage.
• Front access copper insert terminal.
• Thermally welded cover to case bond, eliminates both acid and electrical leaks.
• Over-sized, through the partition inter-cell welds provide low resistance connections with minimal power loss.
• Each cell has a low pressure safety release venting system recognized per U.L. 924.
• Measured high vacuum acid fill reduces electrical variability between cells.
• 100% recyclable materials, MSDS.

• Terminal covers and custom inter-connecting battery cables. (Terminal covers are unit connectors standard on the CSL models).
• SLC is available in all models.

The FT series of batteries are ideal for installations where space is at a premium.

The front access design permits rapid installation and reduced maintenance time.

• Ten year design life in telecom float service.
• A recognized component of U.L.
• Valve regulated lead acid battery (VRLA).
• Capacity @ 77°F (25°C) 58.4 AH (8 hrs) to 1.75 V.P.C. Absorbed glass mat technology (AGM) with gas recombination greater than 99%.
• Operates at a low internal pressure.
• Never needs watering; minimal maintenance.
• Shock absorbent thick wall construction.
• Advanced lead tin calcium alloy, reduces grid corrosion and promotes long battery life.
• Flame-retardant ABS plastic case and cover compliant with U.L.1778 V-0 with an Oxygen Limiting Index of greater than 28%.
• Cold forged nonporous terminal bushings; eliminate post leakage.
• Thermally welded case to cover bond; eliminates both acid and electrical leaks.
• Over-sized, through the partition inter-cell welds for minimal power loss.
• Flame arresting, low pressure safety release venting system for individual cells, recognized per U.L. 924.
• Measured high vacuum acid fill, reduces electrical variability between cells.
• Terminal and bussbar covers.

• Custom wire harnesses.
• 10 volt version.
• High temperature retaining sleeves.

• UL Compliant
• NEBS Compliant
• EUROBAT, 10 year plus classification

The PM SERIES is a family of six and twelve volt batteries with capacities from 4.5 - 44 AH at the C/20 rate.

They are of VRLA / AGM design and incorporate the latest advances in this class of batteries, making them ideal for a variety of applications.

• Uninterrupted power supplies
• Security and fire alarm systems.
• Laboratory and test equipment
• Monitoring equipment.
• Telecom equipment.
• Emergency lighting.
• Power tools.
• Medical equipment.
• Consumer electronics.
• Portable equipment.
• Toys and hobbies.
• Marine instruments.

• Non-spillable Valve Regulated Lead Acid (V.R.L.A.) Design.
• Advanced absorbed glass mat technology.
• Sealed construction for operation in any position except upside down.
• Wide operating temperature range.
• High discharge rates and low self discharge rates.
• Available in VO Flame Retardant Material.
• High impact resistant plastic case.
• Each cell has a low pressure safety release valve.
• 98% recyclable.
• Not restricted for Surface, Maritime and Air Transport.

The Broadband Series of Valve Regulated Lead Acid (V.R.L.A.)batteries has been specifically designed for the rigorous requirements of Broadband Power.

This line of batteries is offered in both standard and premium versions to cover a wide range of applications. The Standard Power Broadband Series is designed for CATV. The Premium Power Broadband Series is designed to provide advanced protection for CATV / Telephony use, where superior performance and battery life are required.

Cast-on strap design for better consistancy and better life

• Drop ship program.
• Jit deliveries.
• Recycling pick-up program.

• Standard black polypropylene case and cover with reinforced end walls.
• Removable carrying handles.
• A recognized component of U.L..
• Gas recombination greater than 99%.
• Operates at a low internal pressure.
• Never needs watering, minimal maintenance.
• 99.985% pure lead, calcium alloy grids.
• Shock absorbent thick wall polypropylene cases.
• Cold forged non-porous terminal bushings, eliminate post leakage.
• Thermally welded case to cover bond, eliminates both acid and electrical leaks.
• Over-sized, through the partition inter-cell welds provide low resistance connections, with minimal power loss.
• Flame arresting, low pressure safety release venting system for individual cells, recognized per U.L. 924.
• Can be used in any orientation, upright side or end is recommended. 100% recyclable materials.
• Measured high vacuum acid fill, reduces electrical variability between cells.

The most comprehensive range of VRLA battery systems designed for standby applications that require reliable power and long life.

 

• Telecom, wired and wireless.
• UPS.
• Switchgear.
• Renewable Energy.
• Emergency Lighting.

Design Life	20 years in float service at 77° F (25° C)
Patented catalyst in each cell	Improves life by lowering float current, reducing grid corrosion and reducing water loss. It°s effects are even more apparent in higher temperatures.
Separators:	Micro porous glass mat, H&V is standard.
Plate protection:	Plate growth without damage is allowed by a collapsible bridge installed in the bottom of the container.
Electrolyte:	Sulphuric acid solution, 1.300 s.g, when fully charged.
Float Voltage:	2.25 volts per cell at 77° F (25° C).
Self-discharge rate:	2% per month at 77° F (25° C).
Intercell connectors:	Plated copper bussbars.
Internal air passages	Aid heat dissipation, and ensure consistent cell temperatures.
Cell fronts	Protected with a transparent, FR plastic cover.
Modules:	Stackable to 8 high while certified to UBC seismic zone 4, Welded steel construction, Internal air passages aid heat dissipation, ensure consistent cell temperatures, Coated with an acid resistant powdered epoxy.

The Power Traffic Grid Series uses Absorbed Glass Mat Technology (A.G.M.) to back up traffic light intersections for nema traffic signal systems.

All Power Traffic Grid Batteries meet CALTRANS specifications.

 

• Valve Regulated Lead Acid Battery (V.R.L.A.).
• A recognized component of U.L..
• Absorbed glass mat technology (A.G.M.)
• Gas recombination greater than 99%.
• Operates at a low internal pressure.
• Never needs watering, minimal maintenance
• 99.985% pure lead calcium grids.
• Shock absorbent thick wall construction.
• Cold forged non-porous terminal bushings, eliminate post leakage.
• Thermally welded case to cover bond, eliminates both acid and electrical leaks.
• Over-sized, through the partition inter-cell welds provide low resistance connections, with minimal power loss.
• Each cell has a flame arresting low pressure safety release venting system, recognized per U.L. 924.
• Measured high vacuum acid fill, reduces electrical variability between cells.
• 100% recyclable materials.

The Direct Power series is a family of six,eight and twelve volt Deep Cycle Flooded batteries with capacities that range from 75-395 AH at the C/20 rate. the full range covers a wide variety of applications. These batteries are ideal choice for:

• Off Grid Power Systems
• Floor Care Equipment
• Man Lift and Access Equipment
• Traffic Management Systems
• Golf Cart & Electrical Vehicles
• Aerial Work Platforms
• Industrial Cleaning Equipments
• Material Handling Systems
• Marine/RV Applicationst

The Power High-Rate Series of valve regulated lead acid (V.R.L.A.) batteries have been developed and refined by Power Battery since 1972. It is the battery of choice for many OEM's and users throughout the world.

Our state of the art V.R.L.A. design utilizes an absorbed glass mat (A.G.M.) separator technology to immobilize the battery electrolyte. There is never any need to add water to the cells and in fact all vents are factory sealed.

These batteries are the ideal choice for U.P.S., emergency lighting, switchgear and other standby applications which need reliable, high rate power. Since these batteries are low-gassing they require no special ventilation. Additionally, a compact design makes them perfect for low maintenance and space restricted applications.

Cast-on strap design for better consistancy and better life

• Ten year design life in standby float service
• A recognized component of U.L.
• Non-spillable valve regulated lead acid battery (VRLA) design.
• Advanced absorbed glass mat technology (AGM) with gas recombination greater than 99%.
• Operates at a low internal pressure.
• Never needs watering, minimal maintenance.
• 99.985% pure lead calcium grids.
• Shock absorbent thick wall polypropylene cases.
• Flame retardant cases are optional (TC and SLF models).
• TC and SLF models are compliant with UL1778 requirements,
• Cold forged non-porous terminal bushings eliminate post leakage.
• Thermally welded cover to case bond, eliminates both acid and electrical leaks.
• Over-sized, through the partition inter-cell welds provide low resistance connections with minimal power loss.
• Each cell has a low pressure safety release one way venting system recognized per U.L. 924.
• Measured high vacuum acid fill reduces electrical variability between cells.
• 100% recyclable materials, MSDS.

The POWER SOLAR series is a line of advanced GEL sealed batteries that will provide to the user a long life product when used in cycling applications. This is made possible because Power Battery uses the Advanced GEL (patent pending) design which combines the best features of AGM and GEL construction into one battery life.

Cast-on strap design for better consistancy and better life

15% DOD	2200 cycles
25% DOD	1700 cycles
50% DOD	900 cycles
80% DOD	600 cycles

• Shock absorbent polypropylene plastic Resistant to extreme temperatures and vibration.
• Heat sealed jar & cover assembly Eliminates the risk of both acid and electrical leaks.
• Maintenance free construction design.
• Advanced GEL design. Provides deep cycle capability throughout the life of the battery.
• Oversized internal components. Insures minimal voltage drop and more power availability.
• Industrial grade battery plates. Out lasts wet lead acid batteries of similar caliber.
• Each cell comes with a safety release mechanism to prevent venting under normal operating conditions.
• Multiple operating positions (except upside down).
• 100% recyclable materials.

• Battery cables and harnesses.
• Battery boxes.
• Others models available.